The energy efficient home improvement credit limit worksheet tells you how much of your credit you can actually claim, based on the tax you owe. You complete it on Form 5695, the IRS form for residential energy credits, and your credit is the smaller of your calculated amount and the limit based on your tax liability.
It is a short worksheet, but it matters. If your tax bill is small, it can cut your credit below what your improvements earned.
Timing is the most important detail right now. The credit cannot be claimed for property placed in service after December 31, 2025, so this guide applies to your 2025 return. Improvements placed in service after that date do not qualify.
Below, you’ll see where the worksheet fits in Form 5695, which records to gather, and how to complete it step by step. A filled-in example at the end lets you check your own numbers.
Quick-facts box
At a glance
- Time needed: This depends on how many improvements you made. The worksheet itself has only three lines, so gathering receipts and product ID numbers takes the longest.
- Estimated cost: The IRS form and instructions are free to download. Tax software and preparer fees vary, so check current pricing with your provider.
- Difficulty: Intermediate
- Tools required: the 2025 Form 5695 and its instructions, your 2025 Form 1040 and Schedule 3, receipts, product ID numbers, manufacturer certification statements, and a calculator or tax software.
- Safety note: Some qualifying upgrades involve electrical or gas work. This guide covers paperwork only. Hire a licensed professional for the installation itself.
What the Energy Efficient Home Improvement Credit Limit Worksheet Is
The worksheet is a short calculation in the IRS instructions. It does not figure your credit. It sets a ceiling on how much of the credit you can use.
Where it sits in Form 5695
Form 5695 Part II is the section for the energy efficient home improvement credit. Section A covers building-envelope upgrades such as insulation, air sealing, exterior doors, windows and skylights. Section B covers items like heat pumps, central air conditioners, furnaces, boilers, water heaters, electrical panel upgrades and home energy audits. irs
You add up your items first, then use the worksheet to set your limit. The worksheet result goes on line 31, and if it comes out as zero or less, you enter zero on lines 31 and 32. irs
Safety note: Panel upgrades and gas furnaces involve electrical and gas risks. Hire a licensed electrician or HVAC contractor, and keep the paperwork they give you.
Why the limit exists
The worksheet starts with the tax on your Form 1040, subtracts certain other credits you are taking, and the remainder is the most this credit can be. In plain terms, the credit can lower your tax, but it can’t go past the tax you owe.
This is separate from the dollar caps. The credit is 30% of qualifying costs, with a combined annual limit of $1,200 for most items and a separate $2,000 limit for heat pumps, heat pump water heaters and biomass stoves and boilers. The old lifetime limit has been replaced by these annual limits.
You may also see this credit called Section 25C. Section 25C is the formal name for the credit. The older name was the nonbusiness energy property credit.
How it differs from the residential clean energy credit
Form 5695 holds two credits, and each has its own limit worksheet. Part I covers solar electric, solar water heating, small wind, geothermal heat pump, battery storage and fuel cell property. The residential clean energy credit limit worksheet belongs to line 14. Ours belongs to line 31.
Part II is only for existing homes, while Part I can also cover homes under construction. If you claim both, finish Part II first. The Part I worksheet subtracts your Part II credit from line 32.
Does Your Project Still Qualify for the 2025 Energy Efficient Home Improvement Credit?
Only if the work was finished and in use by the end of 2025. Here is how to check.
The December 31, 2025 cutoff
The IRS says you can’t claim this credit for expenditures made, or property placed in service, after December 31, 2025. “Placed in service” means the item is installed and ready to use. The IRS treats costs as paid when the original installation is finished, so the installation date matters more than the date you signed a contract or paid a deposit. irsirs
What if you installed something in 2026?
It doesn’t qualify for this credit, so leave it off your 2025 Form 5695. Check IRS.gov/Form5695 for any later changes before you file.
If your 2025 return is already filed and you left out a qualifying 2025 improvement, ask a tax professional about amending it.
Which improvements qualify, and what each is worth
For building upgrades such as windows, doors and insulation, the work must be on your main home, you must be the original user, and the part should be expected to stay in use for at least five years. Windows, doors and qualified energy property installed in 2025 also need a valid manufacturer ID number for each item. The documents section explains where to find it.
These are the IRS credit limits per category:
| Improvement | Credit limit |
| Insulation and air sealing | $1,200 |
| Exterior doors | $250 each, $500 total |
| Windows and skylights | $600 combined |
| Central air conditioner | $600 |
| Natural gas, propane or oil water heater | $600 |
| Natural gas, propane or oil furnace or boiler | $600 |
| Electrical panel and circuit upgrades | $600 |
| Home energy audit | $150 |
| Heat pumps, heat pump water heaters, biomass stoves and boilers | $2,000 (separate limit) |
A few limits catch people out:
- Labor: Installation labor doesn’t count for windows, doors and insulation, but it does count for items like furnaces and heat pumps.
- Panel upgrades: They must have at least 200 amps of capacity and be installed with qualifying improvements or equipment.
- Audits: A Qualified Home Energy Auditor must perform or supervise the audit.
- Subsidies: Untaxed utility subsidies reduce your cost, and subsidized energy financing can’t be used to figure the credit.
Safety note: Electrical panel, gas appliance and refrigerant-line work should be done by licensed professionals. A tax credit is never a reason to DIY these jobs.
Documents You Need Before You Start
Collect these before you open the form. Most of the work is paperwork, and a missing number can stop you partway through.
- Receipts and invoices. Each should show what you paid per item and when installation finished. The IRS treats costs as paid when the original installation is complete.
- Qualified manufacturer identification numbers (QMIDs). For 2025, you need a four-character QMID for each qualifying item. If it isn’t on your paperwork, ask your installer or the manufacturer.
- Manufacturer’s written certification. You can rely on it to show a product qualifies. Don’t attach it to your return, but keep it for your records.
- Home energy audit report, if you claim an audit. It must include the auditor’s name and tax ID, a statement that they are certified, and the name of the certification program.
- Utility subsidy records. Untaxed subsidies reduce your cost before you figure the credit.
- Your 2025 Form 1040 and Schedule 3. The worksheet pulls figures from both.
Forms and Tools You Need
Download the 2025 Form 5695 and the Form 5695 instructions from IRS.gov. The worksheet is printed in the instructions, not on the form itself. The IRS also points to IRS.gov/Form5695 for later updates and to Fact Sheet 2025-01 for FAQs. irs
You will also need:
- Your 2025 Form 1040 and Schedule 3, open beside the worksheet.
- A calculator or tax software to handle the arithmetic.
- A simple folder or spreadsheet that lists each item, its cost, its QMID and its installation date. Some lines require a statement listing the QMID and cost of every item you group together, so this list saves time later.
How to Complete the Energy Efficient Home Improvement Credit Limit Worksheet, Step by Step
You’ll work in this order: figure the credit for each item on Form 5695 Part II, apply the dollar limits, then use the worksheet to set your final limit. Steps 1 to 4 cover the first part.
Step 1: Sort your receipts by category
Group your receipts the way the form does. Section A covers insulation and air sealing, exterior doors, and windows and skylights. Section B covers central air conditioners, gas, propane or oil water heaters, furnaces and boilers, electrical panel upgrades, home energy audits, and heat pumps. Write each item’s cost, installation date and QMID on one list.
Labor needs separate handling. Leave out installation labor for Section A items, but include it for Section B items.
Step 2: Confirm each item qualifies
Start with the yes/no questions at the top of Part II. The work must be on your main home in the United States, you must be the original user, and building components must be expected to stay in use at least five years. A “No” to any of these means you can’t take the credit, and you can only claim it on one main home. New-home construction doesn’t qualify for this credit.
Then check each product against its standard. Insulation must meet the energy code criteria, doors and windows must meet Energy Star requirements, and most Section B equipment must reach the highest efficiency tier. You can rely on the manufacturer’s written certification, which you keep rather than attach.
Safety note: Panel upgrades must follow the National Electric Code and have at least 200 amps of capacity. Have a licensed electrician do this work, and ask them to confirm these points in writing.
Step 3: Work out the credit for each category
Follow the Form 5695 instructions line by line for each category in Form 5695 Part II. The credit is 30% of your qualifying costs, and each category has a credit line with a stated maximum.
Some categories ask you to list your most expensive items individually with their QMIDs. For example, the most expensive door goes on one line, the next two on another, and all other doors together on a separate line with an attached statement listing each QMID and cost. Windows and skylights work similarly.
Step 4: Apply the per-item limits
The form tells you not to enter more than a set amount for each category: $1,200 for insulation and air sealing, $250 for a single exterior door and $500 for all doors, $600 for windows and skylights, $600 each for central air conditioners, water heaters, furnaces or boilers and panel upgrades, $150 for a home energy audit, and $2,000 for heat pumps and similar equipment. irs
If a calculated credit is higher than the limit, enter the limit instead. Your records should still show the full cost.
Steps 5-7
Step 5: Apply the annual cap
Now combine your categories under the annual caps. Most items share one $1,200 combined limit, while heat pumps, heat pump water heaters and biomass stoves and boilers have a separate $2,000 limit. The instructions refer to your section total as line 27, the amount limited to $1,200 as line 28, and the heat pump amount limited to $2,000 as line 29h. Labels can shift between form versions, so match them against your 2025 form.
Two situations change the math. If you share a home with someone other than your spouse, each of you files your own Form 5695, you split the credit by how much each person paid, and you check the box on line 32a with an attached statement. If you and your spouse lived in separate main homes, the limits apply to each of you separately.
Step 6: Compare with your tax liability
This step uses the worksheet itself. Line 1 is your Form 1040 line 18 amount. Only count credits actually claimed on your return.
Line 3 is line 1 minus line 2. That result goes on Form 5695 line 31, and if it is zero or less you enter zero on lines 31 and 32. Your credit on line 32 is then the smaller of line 30 or line 31.
Because the worksheet depends on the rest of your return, finish your other credits first, or let tax software do the sequencing.
Step 7: Carry the result to Form 1040
Enter the line 32 amount on Schedule 3 (Form 1040), line 5b. Schedule 3’s total of nonrefundable credits then flows to Form 1040 line 20. Attach Form 5695 to your return, plus any required statements, such as the list of grouped items or a joint-occupant allocation. Keep your manufacturer certifications on file instead of attaching them. jotformirs
If your credit was cut by the limit, the IRS instructions provide a carryforward only for the residential clean energy credit. Other guidance says unused energy efficient home improvement credit generally does not carry forward. I’d tag this as [VERIFY] in your final draft.
Worked Example: A Filled-In Sample
Seeing real-looking numbers makes the worksheet much easier to follow. Every amount below is made up to show the math. They are not price estimates, so don’t use them to budget a project.
The scenario
A married couple files jointly and finishes all their work in 2025 on their main home. Every item qualifies, each has a QMID, and they kept the manufacturer certifications. They had four jobs done: attic insulation and air sealing, new windows, one new exterior door, and a gas furnace.
Installation labor is left out for insulation, windows and doors, but included for the furnace. The “cost that counts” column below reflects that.
Part 1: Figure the credit for each item
The credit is 30% of qualifying costs, then each category is held to its own limit.
| Item | Cost that counts | 30% | Limit | Credit after limit |
| Insulation and air sealing (materials only) | $2,000 | $600 | $1,200 | $600 |
| Windows (product only) | $3,000 | $900 | $600 | $600 |
| Exterior door (product only) | $1,000 | $300 | $250 | $250 |
| Gas furnace (product and installation) | $5,000 | $1,500 | $600 | $600 |
| Total before the annual cap | $2,050 | |||
| After the $1,200 combined cap | $1,200 |
The $1,200 combined limit applies to most of these items together. That is why $2,050 shrinks to $1,200. This amount goes on line 30 of the sample’s Form 5695. irs
Part 2: Fill in the limit worksheet
| Worksheet line | What you enter | Sample amount |
| Line 1 | Tax from Form 1040, line 18 | $1,000 |
| Line 2 | Other credits taken (here, the child and dependent care credit) | $400 |
| Line 3 | Line 1 minus line 2, then enter on Form 5695 line 31 | $600 |
| Form 5695 line 32 | Smaller of line 30 (1,200)orline31(600) | $600 |
Line 3 is line 1 minus line 2. Line 32 is the smaller of line 30 or line 31, and that amount goes on Schedule 3, line 5b. The couple earned $1,200 of credit but can use only $600, because their tax bill after other credits is $600. irsjotform
What changes if you hit the cap, or your tax is low?
- Higher tax bill: if line 3 were $1,200 or more, line 32 would be $1,200.
- Very low tax: if line 3 is zero or less, you enter zero on lines 31 and 32. No credit is allowed that year.
- Adding a heat pump: heat pumps have their own $2,000 limit, so they would not use up the $1,200 bucket.
- The unused $600: other guidance says unused credit of this type generally does not carry forward. Confirm this before publishing.
Common Mistakes and Compliance Warnings
Most errors on this credit come from small details. Watch for these:
- Mixing up the two credits. The residential clean energy credit and this credit sit on the same form but use different worksheets. The clean energy worksheet belongs to line 14, and this one belongs to line 31.
- Counting 2026 installations. The credit is not allowed for property placed in service after December 31, 2025.
- Leaving out QMIDs. For 2025, windows, doors and qualified energy property each need a valid QMID. Missing numbers are a common reason claims fail, so collect them before you start.
- Including labor on the wrong items. Leave out installation labor for insulation, windows and doors, but include it for items like furnaces and heat pumps.
- Ignoring subsidies. Untaxed utility subsidies reduce your cost, and subsidized energy financing can’t be used to figure the credit.
- Forgetting the attached statements. Grouped items need a statement listing each QMID and cost, and shared-home claims need an allocation statement. Attach these, but keep manufacturer certifications in your files instead.
- Overlooking the basis adjustment. If you receive the credit, you must reduce your home’s cost basis by the allowed amount. This matters if you sell the home later.
This is general information, not tax advice. Check the IRS instructions for your situation, or ask a qualified tax preparer.
Cost Breakdown: Credit Value vs. What You Spend
Project prices vary a lot by region and contractor, so treat these as ranges, not quotes. All ranges are as of November 2026 and vary by region.
Typical installed project costs
Materials, labor and optional upgrades
Labor matters for the credit. Installation labor is left out of the credit for insulation, windows and doors, but included for items like furnaces. One estimate puts the furnace unit at roughly half to three-quarters of a replacement project’s cost.
Optional upgrades push prices up:
- Furnace venting: upgrading to high efficiency can add $850 to $1,850 for PVC venting and $200 to $400 for a condensate drain. nearbyhunt
- Triple-pane glass: averaged $609 per window in one survey.
- Spray foam: attic spray foam runs about $3.80 to $6.75 per square foot, well above blown-in.
- Door sidelights: these typically add $500 to $2,765. lawnstarter
Safety note: Furnace, gas line and electrical panel work must be done by licensed professionals. Attic insulation means working in tight, hot spaces around wiring, so many homeowners hire a pro.
Credit value
The credit is capped, so the cap, not the price, usually sets the amount. The credit is 30% of qualifying costs, with a $1,200 combined limit for most items and a separate $2,000 limit for heat pumps and similar equipment. It applies only to property placed in service by December 31, 2025, so pricing a 2026 project means no federal credit.
Cost of filing
DIY tax software runs about $0 to $100, while a preparer averages $220 for a basic return and $323 with itemized deductions. Get current quotes before you decide.
Pro Tips
- Keep one folder for receipts, installation dates, QMIDs and manufacturer certifications. You keep the certifications for your records and don’t attach them.
- Finish the rest of your return first. The worksheet pulls from your Form 1040 line 18 and your other credits, so those numbers should be final.
- Do Part II before Part I if you claim both. The clean energy worksheet subtracts your Part II credit.
- Check the “smaller of” rule. Your credit is the lower of your calculated credit and your line 31 limit, so a big credit can still shrink.
- Plan for resale. The credit you receive reduces your home’s cost basis.
FAQs
1. Where do I find the energy efficient home improvement credit limit worksheet?
It’s printed in the Instructions for Form 5695 (2025) under the line 31 instructions, not on the form itself. IRS.gov/Form5695 lists any later updates.
2. What is the maximum energy efficient home improvement tax credit per year?
The credit is 30% of qualifying costs. Most items share a $1,200 combined annual limit, and heat pumps, heat pump water heaters and biomass stoves and boilers have a separate $2,000 limit. Each category also has its own cap, such as $600 for windows and skylights.
3. Is the credit still available for improvements made in 2026?
No. The IRS says you can’t claim it for expenditures or property placed in service after December 31, 2025. Qualifying 2025 improvements belong on your 2025 return. If you’ve already filed, ask a tax professional about amending.
4. Is there a lifetime limit on the credit?
No. The IRS says the lifetime limit was replaced by annual limits. Before 2023, the credit had a $500 lifetime limit.
5. Can I carry forward any unused credit?
The IRS instructions provide a carryforward only for the residential clean energy credit. Other guidance says this credit generally does not carry forward. Confirm with a tax professional.
Conclusion
The energy efficient home improvement credit limit worksheet is short, but it decides how much of your credit you can actually use. Gather your receipts and QMIDs, work through Part II, then let the worksheet set your limit. It’s normal to feel unsure about a tax form, and a filled-in example like the one above helps.
If you made upgrades in 2025, this residential energy efficiency tax credit may still lower your bill. Check the 2025 Form 5695 instructions on IRS.gov before you file, and ask a qualified tax professional about your situation.
